4720-00-540-4112
Hose Assembly,Nonmetallic
5 parts / 5 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MS28759-8-0114 | 14728 | Precision Form Rivet Inc | 5 | 1 |
| MS28759-8-0114 | 14798 | Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company | 5 | 9 |
| MS28759-8-0114 | 32142 | Hydrasearch Company, Llc | 5 | 1 |
| MIL-DTL-8790 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| MS28759-80114 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Precision Form Rivet Inc
CAGE 14728Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company
CAGE 14798Hydrasearch Company, Llc
CAGE 32142Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B FIRST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| AARX | INSIDE DIAMETER | 0.431 INCHES MINIMUM AND 0.462 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.828 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT FIRST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CMLP | THREAD QUANTITY PER INCH | 16 FIRST END |
| CQBD | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER RUBBER IMPREGNATED COTTON FABRIC AND 2ND LAYER RUBBER IMPREGNATED COTTON FABRIC AND 3RD LAYER BRAIDED STEEL WIRE AND 4TH LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES FIRST END |
| CQQF | OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| CQRB | SEAT ANGLE | 37.0 DEGREES FIRST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 11.005 INCHES NOMINAL EXCLUDING END FITTINGS |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF FIRST END |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Precision Form Rivet Inc
CAGE 14728
Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company
CAGE 14798
Hydrasearch Company, Llc
CAGE 32142
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 4720-00-540-4112
NSN 4720-00-540-4112 is a National Stock Number assigned to Hose Assembly,Nonmetallic. This NSN part number belongs to Federal Supply Class 4720 (HOSE AND FLEXIBLE TUBING) under Federal Supply Group 47 (PIPE, TUBING, HOSE, AND FITTINGS). There are 5 part numbers associated with this NSN from 5 manufacturers.
To find the part number for NSN 4720-00-540-4112, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.