4720-00-482-9584
Hose Assembly,Nonmetallic
3 parts / 3 mfrs
Cessna Aircraft Company Dba Textron Aviation
CAGE 71379Textron Aviation Inc
CAGE 7EK50Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division
CAGE 98441DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B FIRST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| AARX | INSIDE DIAMETER | 0.844 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.234 INCHES NOMINAL SECOND END |
| ABKV | OUTSIDE DIAMETER | 1.187 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.312 INCHES NOMINAL SECOND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.312 INCHES NOMINAL SECOND END |
| AECS | BOLT HOLE QUANTITY | 4 FIRST END |
| AFQN | FLANGE LENGTH | 1.750 INCHES NOMINAL SECOND END |
| AGFF | FLANGE WIDTH | 1.750 INCHES NOMINAL SECOND END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL SECOND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| AHNX | BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL SECOND END |
| AJED | RAISED FACE HEIGHT | 0.030 INCHES NOMINAL SECOND END |
| AJEE | RAISED FACE DIAMETER | 1.500 INCHES NOMINAL SECOND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID SECOND END |
| AKUU | END CONNECTION DESIGN | ELBOW SECOND END |
| AKUU | END CONNECTION DESIGN | ELBOW FIRST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE SECOND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CMLP | THREAD QUANTITY PER INCH | 12 FIRST END |
| CQBD | BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES FIRST END |
| CQQF | OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| CQRB | SEAT ANGLE | 37.0 DEGREES FIRST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES FIRST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES SECOND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 30.000 INCHES NOMINAL WORKING |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) SECOND END |
| FEAT | SPECIAL FEATURES | W/BUTYL COATED ASBESTOS BRAID FIRESLEEVE |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) FIRST END |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 4720-00-482-9584
NSN 4720-00-482-9584 is a National Stock Number assigned to Hose Assembly,Nonmetallic. This NSN part number belongs to Federal Supply Class 4720 (HOSE AND FLEXIBLE TUBING) under Federal Supply Group 47 (PIPE, TUBING, HOSE, AND FITTINGS). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 4720-00-482-9584, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.