4720-00-203-0096
Hose Assembly,Nonmetallic
2 parts / 2 mfrs
Ametek Inc Heat Transfer Div
CAGE 60883Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND SECOND END |
| AARX | INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 2.000 INCHES NOMINAL |
| AHNC | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL FIRST END |
| AHNC | CONNECTION STYLE | PLAIN SECOND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT SECOND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT FIRST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING COPPER ALLOY ALL ENDS |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING COPPER ALLOY ALL ENDS |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL HOSE SECOND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL HOSE FIRST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL HOSE SECOND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL HOSE FIRST END |
| CQBD | BURST TEST PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| CQBD | BURST TEST PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQJX | NOMINAL THREAD SIZE | 1.500 INCHES FIRST END |
| CQJX | NOMINAL THREAD SIZE | 1.500 INCHES SECOND END |
| CQJX | NOMINAL THREAD SIZE | 1.500 INCHES SECOND END |
| CQJX | NOMINAL THREAD SIZE | 1.500 INCHES FIRST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| CRSM | VACUUM IN TORR | 254.0 |
| CRSM | VACUUM IN TORR | 254.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 120.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CRXX | MEASURING METHOD AND LENGTH | 120.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | WATER, FRESH SINGLE RESPONSE |
| MEDA | MEDIA FOR WHICH DESIGNED | WATER, FRESH SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | NPSH FIRST END |
| THSD | THREAD SERIES DESIGNATOR | NPSH SECOND END |
| THSD | THREAD SERIES DESIGNATOR | NPSH SECOND END |
| THSD | THREAD SERIES DESIGNATOR | NPSH FIRST END |
| ZZZK | SPECIFICATION/STANDARD DATA | 81348-ZZ-H-561 GOVERNMENT SPECIFICATION |
| ZZZK | SPECIFICATION/STANDARD DATA | 81348-ZZ-H-561 GOVERNMENT SPECIFICATION |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | B GRADE AND 1 TYPE AND A STYLE AND 1 CLASS |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | B GRADE AND 1 TYPE AND A STYLE AND 1 CLASS |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 4720-00-203-0096
NSN 4720-00-203-0096 is a National Stock Number assigned to Hose Assembly,Nonmetallic. This NSN part number belongs to Federal Supply Class 4720 (HOSE AND FLEXIBLE TUBING) under Federal Supply Group 47 (PIPE, TUBING, HOSE, AND FITTINGS). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 4720-00-203-0096, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.