4720-00-009-7253
Hose Assembly,Nonmetallic
2 parts / 2 mfrs
Naval Ship Systems Command
CAGE 80064Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B FIRST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.968 INCHES NOMINAL |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 270.0 |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CMLP | THREAD QUANTITY PER INCH | 16 FIRST END |
| CQBD | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE AND 1ST LAYER BRAIDED STEEL WIRE |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES FIRST END |
| CQQF | OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| CQRB | SEAT ANGLE | 37.0 DEGREES FIRST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES FIRST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 104.000 INCHES NOMINAL WORKING |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF FIRST END |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-H-52471 GOVERNMENT SPECIFICATION |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | B TYPE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 4720-00-009-7253
NSN 4720-00-009-7253 is a National Stock Number assigned to Hose Assembly,Nonmetallic. This NSN part number belongs to Federal Supply Class 4720 (HOSE AND FLEXIBLE TUBING) under Federal Supply Group 47 (PIPE, TUBING, HOSE, AND FITTINGS). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 4720-00-009-7253, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.