NSN
3120-00-003-3256
Bushing,Sleeve
FSC 3120 — BEARINGS, PLAIN, UNMOUNTEDFSG 31 — BEARINGS
1 parts / 1 mfrs
Part Numbers for NSN 3120-00-003-32561 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 114S4702-10 | 77272 | The Boeing Company | 3 | 2 |
Manufacturers (1)
The Boeing Company
CAGE 77272Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 0.5610 INCHES MINIMUM AND 0.5810 INCHES MAXIMUM |
| ADAR | BODY OUTSIDE DIAMETER | 0.4998 INCHES MINIMUM AND 0.5005 INCHES MAXIMUM |
| ADAS | BODY INSIDE DIAMETER | 0.3758 INCHES MINIMUM AND 0.3773 INCHES MAXIMUM |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.4900 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AJFM | END TO FLANGE DISTANCE | 0.1090 INCHES MINIMUM AND 0.1290 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | SQUARE CENTER FLANGE OUTSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | ROUND CENTER FLANGE LEFT BODY CORNER |
| BZLX | CORNER SHAPE | CHAMFERED OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | ROUND CENTER FLANGE RIGHT BODY CORNER |
| BZLX | CORNER SHAPE | CHAMFERED INSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE CENTER FLANGE OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE INSIDE RIGHT CORNER |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES RIGHT END SURFACE OF BODY |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES RIGHT END SURFACE OF FLANGE |
| CSYM | SURFACE FINISH | 80.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY |
| CSYM | SURFACE FINISH | 80.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES LEFT END SURFACE OF BODY |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES LEFT END SURFACE OF FLANGE |
| CTSN | LEFT END BODY DIAMETER | 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | LEFT END FLANGE REDUCED TO 0.800 IN. DIA,LEFT END BODY 0.6150 IN. MIN,0.6350 IN. MAX OD,FLANGE W OF REDUCED AREA 0.035 IN. MIN,0.050 IN. MAX |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 114S4702-10,77272 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE |
| TEST | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
Related NSNs in FSC 3120
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN3120-00-003-3256
NIIN000033256
FSC3120
DEMILA
PARTS1
MFRS1
Manufacturers
About NSN 3120-00-003-3256
NSN 3120-00-003-3256 is a National Stock Number assigned to Bushing,Sleeve. This NSN part number belongs to Federal Supply Class 3120 (BEARINGS, PLAIN, UNMOUNTED) under Federal Supply Group 31 (BEARINGS). There are 1 part number associated with this NSN from 1 manufacturer.
To find the part number for NSN 3120-00-003-3256, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.