3110-01-211-7520
Bearing,Ball,Duplex
Unit Price
$500.97
per PR
7 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 639AS6522-2 A-B | 30003 | Naval Air Systems Command Managed Original Design Activity Not Material/Parts Supplier | 5 | 9 |
| 639AS6561-2 A-B | 30003 | Naval Air Systems Command Managed Original Design Activity Not Material/Parts Supplier | 1 | 2 |
| 639AS6564-2 A-B | 40920 | Mpb Corp Div Timken Super Precision | 3 | 2 |
| E998-804-2 A-B | 40920 | Mpb Corp Div Timken Super Precision | 5 | 9 |
| E998-808-1 A-B | 40920 | Mpb Corp Div Timken Super Precision | 3 | 2 |
| SR40405B311A-2 A-B | 83086 | New Hampshire Ball Bearings Inc Div Hitech Division | 5 | 9 |
| SR40415B30-2 A-B | 83086 | New Hampshire Ball Bearings Inc Div Hitech Division | 3 | 2 |
Naval Air Systems Command Managed Original Design Activity Not Material/Parts Supplier
CAGE 30003Mpb Corp Div Timken Super Precision
CAGE 40920New Hampshire Ball Bearings Inc Div Hitech Division
CAGE 83086| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $500.97 | PR | 0 |
| 01-OCT-2025 | $500.97 | PR | 0 |
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.2030 INCHES MINIMUM AND 0.2350 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.234351 INCHES MINIMUM AND 0.234400 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.406101 INCHES MINIMUM AND 0.406150 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AKVV | INTERNAL CLEARANCE | 0.0006 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| CTHQ | BEARING PRELOAD RATING | 1.75 POUNDS MINIMUM AND 2.25 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 5.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | CONSISTS OF ONE BEARING WITHOUT A FLANGE AND ONE BEARING WITH A FLANGE,FLANGE 0.4360 IN. MIN AND 0.4370 IN. MAX DIA,0.0220 IN. MIN AND 0.0230 IN. MAX W |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | 639AS3195 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | GREASE LUBRICATION |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| SFTT | SURFACE TREATMENT | PASSIVATE INNER RING |
| SFTT | SURFACE TREATMENT | PASSIVATE OUTER RING |
| SFTT | SURFACE TREATMENT | PASSIVATE BALL |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 3110-01-211-7520
NSN 3110-01-211-7520 is a National Stock Number assigned to Bearing,Ball,Duplex. This NSN part number belongs to Federal Supply Class 3110 (BEARINGS, ANTIFRICTION, UNMOUNTED) under Federal Supply Group 31 (BEARINGS). There are 7 part numbers associated with this NSN from 3 manufacturers.
The current government unit price for NSN 3110-01-211-7520 is $500.97. Price history shows 2 recorded price changes.
To find the part number for NSN 3110-01-211-7520, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.