3110-01-195-5147
Cam Follower,Needle Bearing
Unit Price
$26.93
per EA
1 parts / 1 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| NAS562-7TEE5 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $26.93 | EA | 0 |
| 01-OCT-2025 | $26.93 | EA | 0 |
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.4220 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.2815 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9995 INCHES MINIMUM AND 1.0010 INCHES MAXIMUM |
| AGRJ | STUD DIAMETER | 0.4355 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.5260 INCHES MINIMUM AND 0.5310 INCHES MAXIMUM |
| AGXF | STUD LENGTH | 0.7345 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| CBBL | FEATURES PROVIDED | FLUSH LUBRICATION FITTING |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| FEAT | SPECIAL FEATURES | LUBRICATOR IN THREADED END OF STUD,NO COTTER PIN HOLE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYAMIDE NYLON SEAL |
| MATT | MATERIAL | STEEL COMP E52100 STUD |
| MATT | MATERIAL | STEEL END PLATE |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RACE |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE STUD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RACE |
| SFTT | SURFACE TREATMENT | CADMIUM END PLATE EXPOSED SURFACES |
| SFTT | SURFACE TREATMENT | CHROMIUM OUTER RACE |
| SFTT | SURFACE TREATMENT | CADMIUM STUD |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STUD |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RACE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE END PLATE EXPOSED SURFACES |
| STYL | STYLE DESIGNATOR | CAM FOLLOWER |
| TEST | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 3110-01-195-5147
NSN 3110-01-195-5147 is a National Stock Number assigned to Cam Follower,Needle Bearing. This NSN part number belongs to Federal Supply Class 3110 (BEARINGS, ANTIFRICTION, UNMOUNTED) under Federal Supply Group 31 (BEARINGS). There are 1 part number associated with this NSN from 1 manufacturer.
The current government unit price for NSN 3110-01-195-5147 is $26.93. Price history shows 2 recorded price changes.
To find the part number for NSN 3110-01-195-5147, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.