NSN
3110-01-111-1098
Bearing,Ball,Duplex
FSC 3110 — BEARINGS, ANTIFRICTION, UNMOUNTEDFSG 31 — BEARINGS
1 parts / 1 mfrs
Part Numbers for NSN 3110-01-111-10981 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 100HDMEG33 | 70854 | Schaeffler Aerospace Usa Corp Div Schaeffler Aerospace Usa Corporation | 3 | 2 |
Manufacturers (1)
Schaeffler Aerospace Usa Corp Div Schaeffler Aerospace Usa Corporation
CAGE 70854Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.6300 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.3937 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.0236 INCHES NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZJ | BEARING PRELOAD DESIGNATION | LIGHT |
| AKVV | INTERNAL CLEARANCE | 0.0003 INCHES NOMINAL RADIAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | AKVV |
| CTHQ | BEARING PRELOAD RATING | 15.0 POUNDS NOMINAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | GREASE LUBRICATION |
| MATT | MATERIAL | STEEL COMP E52100 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
Related NSNs in FSC 3110
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN3110-01-111-1098
NIIN011111098
FSC3110
DEMILA
PARTS1
MFRS1
About NSN 3110-01-111-1098
NSN 3110-01-111-1098 is a National Stock Number assigned to Bearing,Ball,Duplex. This NSN part number belongs to Federal Supply Class 3110 (BEARINGS, ANTIFRICTION, UNMOUNTED) under Federal Supply Group 31 (BEARINGS). There are 1 part number associated with this NSN from 1 manufacturer.
To find the part number for NSN 3110-01-111-1098, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.