3110-01-030-4939
Bearing,Ball,Duplex
4 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| AMVW540KDCRVDBFS171 | 21335 | Timken Co Div the Timken Company | 5 | 9 |
| 3TCRS14-21UDB1704 | 78118 | Mpb Corporation Dba Mpb Corp | 3 | 2 |
| 901815 | 82577 | Raytheon Company Dba Raytheon | 7 | 2 |
| SR540PTC3-1-ABEC7 | 83086 | New Hampshire Ball Bearings Inc Div Hitech Division | 3 | 2 |
Timken Co Div the Timken Company
CAGE 21335Mpb Corporation Dba Mpb Corp
CAGE 78118Raytheon Company Dba Raytheon
CAGE 82577New Hampshire Ball Bearings Inc Div Hitech Division
CAGE 83086DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.8748 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.3121 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | RADIAL |
| AKVV | INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| CTHQ | BEARING PRELOAD RATING | 4.0 POUNDS NOMINAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MATT | MATERIAL | OIL LUBRICATION |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MATT | MATERIAL | COTTON AND PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 3110-01-030-4939
NSN 3110-01-030-4939 is a National Stock Number assigned to Bearing,Ball,Duplex. This NSN part number belongs to Federal Supply Class 3110 (BEARINGS, ANTIFRICTION, UNMOUNTED) under Federal Supply Group 31 (BEARINGS). There are 4 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 3110-01-030-4939, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.