3110-00-008-6675
Bearing,Ball,Annular
4 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| S3332C5P35 | 40920 | Mpb Corp Div Timken Super Precision | 3 | 2 |
| VSR133K4 | 70854 | Schaeffler Aerospace Usa Corp Div Schaeffler Aerospace Usa Corporation | 3 | 2 |
| SR1335K35 | 83086 | New Hampshire Ball Bearings Inc Div Hitech Division | 3 | 2 |
| 30900110006 | 89944 | Elbitamerica, Inc. | 1 | 2 |
Mpb Corp Div Timken Super Precision
CAGE 40920Schaeffler Aerospace Usa Corp Div Schaeffler Aerospace Usa Corporation
CAGE 70854New Hampshire Ball Bearings Inc Div Hitech Division
CAGE 83086Elbitamerica, Inc.
CAGE 89944DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.0625 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.0937 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.1875 INCHES NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| MATT | MATERIAL | STEEL COMP 410 RETAINER |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 3110-00-008-6675
NSN 3110-00-008-6675 is a National Stock Number assigned to Bearing,Ball,Annular. This NSN part number belongs to Federal Supply Class 3110 (BEARINGS, ANTIFRICTION, UNMOUNTED) under Federal Supply Group 31 (BEARINGS). There are 4 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 3110-00-008-6675, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.