3040-00-356-6892
Collar,Shaft
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 11547P5 | 06650 | Bell and Howell Phillipsburg Co Corporate Offices | 5 | 9 |
| SM-B-338606 | 80063 | Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir | 3 | 2 |
Bell and Howell Phillipsburg Co Corporate Offices
CAGE 06650Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
CAGE 80063DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AATE | CHAMFER ANGLE IN DEG | 45.0 |
| ABKV | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| ABNM | THICKNESS | 0.437 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2510 INCHES NOMINAL |
| AHYF | SECURING HOLE QUANTITY | 2 |
| AHYG | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 |
| CQBP | SCREW THREAD SERIES DESIGNATOR AND LOCATION | ALL HOLES UNIFIED NATIONAL COARSE (UNC) |
| CQJX | NOMINAL THREAD SIZE | 0.164 INCHES ALL HOLES |
| CQKB | SECURING HOLE TYPE AND LOCATION | THREADED ALL HOLES |
| CSYM | SURFACE FINISH | 64 MICROINCHES OPPOSITE BEARING FLAT |
| CSYM | SURFACE FINISH | 125 MICROINCHES LARGEST BEARING FLAT |
| MATT | MATERIAL | STEEL COMP 1213 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI 1113 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1113 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ROUND W/DOUBLE CHAMFER |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 3040-00-356-6892
NSN 3040-00-356-6892 is a National Stock Number assigned to Collar,Shaft. This NSN part number belongs to Federal Supply Class 3040 (MISCELLANEOUS POWER TRANSMISSION EQUIPMENT) under Federal Supply Group 30 (MECHANICAL POWER TRANSMISSION EQUIPMENT). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 3040-00-356-6892, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.