3020-00-800-8733
Gear,Spur
3 parts / 3 mfrs
Roller Bearing Co of America, Inc Div Pic Design
CAGE 00141Honeywell International Inc. Dba Honeywell International Div Aerospace - Tempe (West Warner Road)
CAGE 59364Allied-Signal Inc Dba Allied-Signal Aerospace Co Electrodynamics Div
CAGE 77068DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | 1.5000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 64 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CQFM | HARDNESS RATING | 75.0 ROCKWELL B MINIMUM AND 83.0 ROCKWELL B MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.531 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.406 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.119 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | SPLIT FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.188 INCHES FIRST END |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | 0.250 INCHES FIRST END |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COMP 303S MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 3020-00-800-8733
NSN 3020-00-800-8733 is a National Stock Number assigned to Gear,Spur. This NSN part number belongs to Federal Supply Class 3020 (GEARS, PULLEYS, SPROCKETS, AND TRANSMISSION CHAIN) under Federal Supply Group 30 (MECHANICAL POWER TRANSMISSION EQUIPMENT). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 3020-00-800-8733, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.