3020-00-769-6515
Gear,Bevel
9 parts / 7 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| A794 | 22852 | Spalla Inc | 5 | 9 |
| GP4236 | 23040 | Ford Motor Co Ford Parts and Service Div Government Part Sales | 5 | 9 |
| GPW4236 | 23040 | Ford Motor Co Ford Parts and Service Div Government Part Sales | 5 | 9 |
| A794 | 34623 | Am General Llc | 5 | 2 |
| GP4236 | 57526 | Ford Motor Company | 5 | 9 |
| GPW4236 | 57526 | Ford Motor Company | 5 | 9 |
| 16385 | 72447 | Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products | 5 | 2 |
| R20941 | 83120 | Pressed Metals of America Inc | 5 | 9 |
| 16385 | 95019 | Dana Corp Spicer Transmission Div | 3 | 2 |
Spalla Inc
CAGE 22852Ford Motor Co Ford Parts and Service Div Government Part Sales
CAGE 23040Am General Llc
CAGE 34623Ford Motor Company
CAGE 57526Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products
CAGE 72447Pressed Metals of America Inc
CAGE 83120Dana Corp Spicer Transmission Div
CAGE 95019DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| ABSA | SPLINE QUANTITY | 10 BOTH ENDS |
| AGJS | PITCH DIAMETER | 2.6660 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 16 |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS |
| CQFM | HARDNESS RATING | 60.0 ROCKWELL C MINIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.7580 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.375 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 57.9947 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.775 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.598 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.965 INCHES BOTH ENDS |
| CWRX | BORE NOMINAL DEPTH | 1.375 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 0.780 INCHES SECOND END |
| MATT | MATERIAL | STEEL COMP E4340H OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE AND AISI/SAE E434H ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CARBON TEETH |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Spalla Inc
CAGE 22852
Ford Motor Co Ford Parts and Service Div Government Part Sales
CAGE 23040
Am General Llc
CAGE 34623
Ford Motor Company
CAGE 57526
Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products
CAGE 72447
Pressed Metals of America Inc
CAGE 83120
Dana Corp Spicer Transmission Div
CAGE 95019
About NSN 3020-00-769-6515
NSN 3020-00-769-6515 is a National Stock Number assigned to Gear,Bevel. This NSN part number belongs to Federal Supply Class 3020 (GEARS, PULLEYS, SPROCKETS, AND TRANSMISSION CHAIN) under Federal Supply Group 30 (MECHANICAL POWER TRANSMISSION EQUIPMENT). There are 9 part numbers associated with this NSN from 7 manufacturers.
To find the part number for NSN 3020-00-769-6515, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.