2530-00-848-5673
Cylinder Assembly,Hydraulic Brak
9 parts / 7 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 46241 | 14892 | Bendix Corp the Brake and Steering Div | 5 | 9 |
| A282871 | 19207 | U S Army Tank Automotive Command Amsta-Im-Mm | 5 | 2 |
| 9004 | 19239 | Echlin Inc | 5 | 9 |
| GQA282871 | 23040 | Ford Motor Co Ford Parts and Service Div Government Part Sales | 5 | 9 |
| 803639 | 34623 | Am General Llc | 3 | 2 |
| 805665 | 34623 | Am General Llc | 5 | 9 |
| GQA282871 | 57526 | Ford Motor Company | 5 | 9 |
| FC9004 | 63477 | Federal Mogul Corp Sub Wagner Brake Moog Automotive Div | 5 | 2 |
| FD9004 | 63477 | Federal Mogul Corp Sub Wagner Brake Moog Automotive Div | 5 | 2 |
Bendix Corp the Brake and Steering Div
CAGE 14892U S Army Tank Automotive Command Amsta-Im-Mm
CAGE 19207Echlin Inc
CAGE 19239Ford Motor Co Ford Parts and Service Div Government Part Sales
CAGE 23040Am General Llc
CAGE 34623Ford Motor Company
CAGE 57526Federal Mogul Corp Sub Wagner Brake Moog Automotive Div
CAGE 63477DEMIL
A
HMIC
P
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 1.844 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 1.969 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.000 INCHES NOMINAL |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| AMQZ | COMPRESSED LENGTH | 2.969 INCHES NOMINAL |
| ASBP | BORE TYPE | STRAIGHT |
| ATEM | EXTENDED LENGTH | 2.969 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| BBJX | MOUNTING POSITION | LEFT |
| CBBL | FEATURES PROVIDED | RUBBER BOOT |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.250 INCHES NOMINAL |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 20 |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.344 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 1.250 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CENTER SECTION |
| CLMT | PORT STYLE | GASKET SEAL SINGLE PORT |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF SINGLE PORT |
| CLMX | PORT THREAD DIAMETER | 0.375 INCHES NOMINAL SINGLE PORT |
| CLMY | PORT THREAD QUANTITY PER INCH | 24 SINGLE PORT |
| CLNB | PORT THREAD CLASS | 2B SINGLE PORT |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Bendix Corp the Brake and Steering Div
CAGE 14892
U S Army Tank Automotive Command Amsta-Im-Mm
CAGE 19207
Echlin Inc
CAGE 19239
Ford Motor Co Ford Parts and Service Div Government Part Sales
CAGE 23040
Am General Llc
CAGE 34623
Ford Motor Company
CAGE 57526
Federal Mogul Corp Sub Wagner Brake Moog Automotive Div
CAGE 63477
About NSN 2530-00-848-5673
NSN 2530-00-848-5673 is a National Stock Number assigned to Cylinder Assembly,Hydraulic Brak. This NSN part number belongs to Federal Supply Class 2530 (VEHICULAR BRAKE, STEERING, AXLE, WHEEL, AND TRACK COMPONENTS) under Federal Supply Group 25 (VEHICULAR EQUIPMENT COMPONENTS). There are 9 part numbers associated with this NSN from 7 manufacturers.
To find the part number for NSN 2530-00-848-5673, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.