What are the part numbers for NSN 2530-00-741-2445?

NSN 2530-00-741-2445 (Arm,Steering Gear) has 3 associated part numbers from 3 manufacturers. View the complete part number cross-reference on this page.

Who manufactures NSN 2530-00-741-2445?

NSN 2530-00-741-2445 is manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, Am General Llc, E.C.a Etablissement Centrald'Approvisionnement Des Forces Armee.

What is the price of NSN 2530-00-741-2445?

Pricing data for NSN 2530-00-741-2445 is available through government procurement records.

NSN

2530-00-741-2445

Name: Arm,Steering Gear — NSN 2530-00-741-2445
SKU: 2530-00-741-2445

Arm,Steering Gear

FSC 2530 — VEHICULAR BRAKE, STEERING, AXLE, WHEEL, AND TRACK COMPONENTSFSG 25 — VEHICULAR EQUIPMENT COMPONENTS

3 parts / 3 mfrs

Part Numbers for NSN 2530-00-741-24453 records

Part Number	CAGE	Manufacturer	RNCC	RNVC
7412445	19207	U S Army Tank Automotive Command Amsta-Im-Mm	3	2
804535	34623	Am General Llc	3	2
804535	SCY13	E.C.a Etablissement Centrald'Approvisionnement Des Forces Armee	5	9

Manufacturers (3)

U S Army Tank Automotive Command Amsta-Im-Mm

Am General Llc

E.C.a Etablissement Centrald'Approvisionnement Des Forces Armee

CAGE SCY13

View NSNs

Identification Data

DEMIL

HMIC

PMIC

ESD/EMI

Item Characteristics

MRC	Requirement	Reply
AAWY	COUNTERBORE DIAMETER	1.063 INCHES NOMINAL
AAWZ	COUNTERBORE DEPTH	0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
ABGL	WIDTH	0.620 INCHES NOMINAL
ABMZ	DIAMETER	0.859 INCHES MINIMUM AND 0.864 INCHES MAXIMUM
ABND	TAPER LENGTH	0.340 INCHES MINIMUM AND 0.560 INCHES MAXIMUM
ADDX	SERRATION INCLUDED ANGLE IN DEG	90.0
AJLA	TEETH QUANTITY	36
APGF	DESIGN TYPE	OFFSET
AXND	COUNTERBORE FEATURE	INCLUDED
CFBR	SECTOR SHAFT MOUNTING END OVERALL WIDTH	1.530 INCHES NOMINAL
CFBS	SECTOR SHAFT MOUNTING END OVERALL THICKNESS	0.720 INCHES MINIMUM AND 0.770 INCHES MAXIMUM
CFBT	SECTOR SHAFT MOUNTING END SERRATED BORE	INCLUDED
CFBW	SMALL END MAJOR DIAMETER	0.890 INCHES NOMINAL
CFBX	TEETH CUT ANGLE IN DEG	1 DEG 37 MIN
CFBY	SMALL END TEETH DEPTH	0.0375 INCHES NOMINAL
CFBZ	DRAG LINK END CHARACTERISTIC	W/INTEGRAL BALL
CFCC	CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE	4.940 INCHES MINIMUM AND 5.060 INCHES MAXIMUM
CTKF	TAPER	0.750 PER FOOT IN INCHES NOMINAL

Related NSNs in FSC 2530

2530-01-162-0559— Plunger,Valve Retur 2530-00-426-4047 2530-00-740-9348 2530-00-458-6341 2530-00-308-1945 2530-01-566-3043— Rim,Wheel,Pneumatic Tire 2530-00-105-2363 2530-00-132-3145— Parts Kit,Disk Brake 2530-01-185-1290— Tie Rod End,Steering 2530-00-912-1590— Parts Kit,Seal

Need full procurement data, packaging, and standardization info?

View Complete NSN Data on NSN Lookup

Quick Reference

NSN2530-00-741-2445

NIIN007412445

FSC2530

DEMILA

PARTS3

MFRS3

Manufacturers

U S Army Tank Automotive Command Amsta-Im-Mm

CAGE 19207

Am General Llc

CAGE 34623

E.C.a Etablissement Centrald'Approvisionnement Des Forces Armee

CAGE SCY13

About NSN 2530-00-741-2445

NSN 2530-00-741-2445 is a National Stock Number assigned to Arm,Steering Gear. This NSN part number belongs to Federal Supply Class 2530 (VEHICULAR BRAKE, STEERING, AXLE, WHEEL, AND TRACK COMPONENTS) under Federal Supply Group 25 (VEHICULAR EQUIPMENT COMPONENTS). There are 3 part numbers associated with this NSN from 3 manufacturers.

To find the part number for NSN 2530-00-741-2445, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.