2530-00-689-5729
Arm,Steering Gear
Unit Price
$421.64
per EA
5 parts / 5 mfrs
American Hoist and Derrick Co
CAGE 02280Linear Motion Llc Div Ugm
CAGE 0A335Terex American Crane Corp
CAGE 49185General Motors Corp Saginaw Div
CAGE 52788Cecom Lr Center
CAGE 97403| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $421.64 | EA | 0 |
DEMIL
A
HMIC
P
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABND | TAPER LENGTH | 1.310 INCHES NOMINAL |
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 80.0 |
| ADGE | BORE LENGTH | 1.000 INCHES NOMINAL |
| AGWJ | BORE SMALLEST DIAMETER | 0.940 INCHES MINIMUM AND 0.944 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 32 |
| APGF | DESIGN TYPE | OFFSET |
| AXND | COUNTERBORE FEATURE | NOT INCLUDED |
| CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | 3.120 INCHES NOMINAL |
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | 1.310 INCHES NOMINAL |
| CFBT | SECTOR SHAFT MOUNTING END SERRATED BORE | INCLUDED |
| CFBW | SMALL END MAJOR DIAMETER | 1.643 INCHES NOMINAL |
| CFBX | TEETH CUT ANGLE IN DEG | 1 DEGREE,37 MINUTES |
| CFBY | SMALL END TEETH DEPTH | 0.0665 INCHES NOMINAL |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/BALL STUD BORE |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | 7.000 INCHES NOMINAL |
| CTKF | TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 2530-00-689-5729
NSN 2530-00-689-5729 is a National Stock Number assigned to Arm,Steering Gear. This NSN part number belongs to Federal Supply Class 2530 (VEHICULAR BRAKE, STEERING, AXLE, WHEEL, AND TRACK COMPONENTS) under Federal Supply Group 25 (VEHICULAR EQUIPMENT COMPONENTS). There are 5 part numbers associated with this NSN from 5 manufacturers.
The current government unit price for NSN 2530-00-689-5729 is $421.64.
To find the part number for NSN 2530-00-689-5729, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.