2520-00-495-7706
Shaft,Axle,Automotive
8 parts / 8 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 7372137 | 19207 | U S Army Tank Automotive Command Amsta-Im-Mm | 5 | 2 |
| A3802D550 | 3D6E9 | Meritor Industrial Products, Llc | 3 | 2 |
| BB5111 | 56442 | Diamond Reo Truck Co | 5 | 9 |
| 9FKW0434 | 62265 | Volvo Trucks North America, Inc. Dba (Foreign Parent Is Volvo Lastvagnar Ab, Goteborg, Sweden.) | 5 | 2 |
| A3802D550 | 63734 | Kaitlin Corp | 5 | 9 |
| 364937 | 65282 | White Motor Corp | 5 | 9 |
| A3802D550 | 78500 | Meritor Heavy Vehicle Systems, Llc | 5 | 9 |
| 12C7045 | 95201 | Napco International Llc Dba Napco International Inc | 5 | 2 |
U S Army Tank Automotive Command Amsta-Im-Mm
CAGE 19207Meritor Industrial Products, Llc
CAGE 3D6E9Diamond Reo Truck Co
CAGE 56442Volvo Trucks North America, Inc. Dba (Foreign Parent Is Volvo Lastvagnar Ab, Goteborg, Sweden.)
CAGE 62265Kaitlin Corp
CAGE 63734White Motor Corp
CAGE 65282Meritor Heavy Vehicle Systems, Llc
CAGE 78500Napco International Llc Dba Napco International Inc
CAGE 95201DEMIL
A
HMIC
P
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAZQ | HOLE DEPTH | 0.531 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 30.688 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 35.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C |
| AGGP | DRILLED HOLE DIAMETER | 0.982 INCHES MINIMUM AND 0.985 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 2.750 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.600 INCHES MINIMUM AND 1.608 INCHES MAXIMUM |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.859 INCHES MINIMUM AND 1.861 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 2.9062 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 1.879 INCHES NOMINAL |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| ASXK | HOLE QUANTITY | 1 |
| BBCD | FIRST END SPLINE QUANTITY | 16 |
| BBCF | SECOND END SPLINE QUANTITY | 12 |
| BNPK | SECOND END FACILITY DIAMETER | 1.655 INCHES MINIMUM AND 1.655 INCHES MAXIMUM |
| BNTC | FIRST END FACILITY WIDTH | 0.151 INCHES MINIMUM |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 29.0 |
| BNTQ | SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTR | SECOND END FACILITY WIDTH | 0.154 INCHES MAXIMUM |
| BNTS | SECOND END FACILITY LOCATION | 2.413 IN. FROM SHAFT END |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNTX | END HOLE TYPE | DRILLED |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| MATT | MATERIAL | STEEL |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
U S Army Tank Automotive Command Amsta-Im-Mm
CAGE 19207
Meritor Industrial Products, Llc
CAGE 3D6E9
Diamond Reo Truck Co
CAGE 56442
Volvo Trucks North America, Inc. Dba (Foreign Parent Is Volvo Lastvagnar Ab, Goteborg, Sweden.)
CAGE 62265
Kaitlin Corp
CAGE 63734
White Motor Corp
CAGE 65282
Meritor Heavy Vehicle Systems, Llc
CAGE 78500
Napco International Llc Dba Napco International Inc
CAGE 95201
About NSN 2520-00-495-7706
NSN 2520-00-495-7706 is a National Stock Number assigned to Shaft,Axle,Automotive. This NSN part number belongs to Federal Supply Class 2520 (VEHICULAR POWER TRANSMISSION COMPONENTS) under Federal Supply Group 25 (VEHICULAR EQUIPMENT COMPONENTS). There are 8 part numbers associated with this NSN from 8 manufacturers.
To find the part number for NSN 2520-00-495-7706, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.