1680-00-540-1930
Shaft Assembly,Flexible
3 parts / 3 mfrs
Eaton Aerospace Llc Dba Eaton Inoac Div Fuel & Motion Control Systems Division
CAGE 17472Eaton Motor Site
CAGE 72121Lockheed Martin Corp
CAGE 98897DEMIL
Q
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3B OR 2 BOTH ENDS |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AAUJ | SPLINE MAJOR DIAMETER | 0.303 INCHES NOMINAL BOTH ENDS |
| ABHP | OVERALL LENGTH | 12.8474 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 12 BOTH ENDS |
| AECT | THREAD DEPTH | 0.310 INCHES NOMINAL BOTH ENDS |
| AEDN | TIP LENGTH | 0.4687 INCHES NOMINAL BOTH ENDS |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.4375 INCHES NOMINAL BOTH ENDS |
| AGJR | MINOR DIAMETER | UNABLE TO DECODE |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS BOTH ENDS |
| AKMH | CORE DIAMETER | 0.276 INCHES NOMINAL |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| APTD | END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS |
| ASDB | WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL BOTH ENDS |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| AXFH | SPLINE LENGTH | 0.275 INCHES NOMINAL BOTH ENDS |
| AXYS | SPLINE TYPE | INVOLUTE BOTH ENDS |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.409 INCHES NOMINAL DIAMETER BOTH ENDS |
| CFRP | CASING LENGTH BETWEEN FERRULES | 11.910 INCHES NOMINAL |
| CFRQ | CASING OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
| CFRW | END OVERALL DIAMETER | 0.875 INCHES NOMINAL BOTH ENDS |
| CFRZ | CORE OVERALL LENGTH | 12.8474 INCHES NOMINAL |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | 2.500 INCHES |
| MATT | MATERIAL | STEEL CASING |
| MATT | MATERIAL | STEEL CORE |
| SFTT | SURFACE TREATMENT | CADMIUM CASING |
| ZZZV | FSC APPLICATION DATA | SHAFT INSTALLATION,TRAILING EDGE FLAP,AIRCRAFT |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 1680-00-540-1930
NSN 1680-00-540-1930 is a National Stock Number assigned to Shaft Assembly,Flexible. This NSN part number belongs to Federal Supply Class 1680 (MISCELLANEOUS AIRCRAFT ACCESSORIES AND COMPONENTS) under Federal Supply Group 16 (AEROSPACE CRAFT COMPONENTS AND ACCESSORIES). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 1680-00-540-1930, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.