NSN
1560-01-474-4388
Latch Assembly,Aircraft
FSC 1560 — AIRFRAME STRUCTURAL COMPONENTSFSG 15 — AEROSPACE CRAFT AND STRUCTURAL COMPONENTS
2 parts / 2 mfrs
Part Numbers for NSN 1560-01-474-43882 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| H2301-7 | 83014 | Hartwell Corporation | 3 | 2 |
| K870336-001 | 84955 | Kaman Aerospace Corporation Dba Air Vehicles & Mro Division | 7 | 2 |
Manufacturers (2)
Hartwell Corporation
CAGE 83014Kaman Aerospace Corporation Dba Air Vehicles & Mro Division
CAGE 84955Identification Data
DEMIL
Q
HMIC
P
PMIC
A
ESD/EMI
A
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 4.050 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.930 INCHES MINIMUM AND 0.935 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | SH-2G(A) SEASPRITE HELICOPTER |
| ASXK | HOLE QUANTITY | 1 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | LATCH ASSEMBLY - HOOK |
| CZEJ | AIRCRAFT STATION NUMBER | WL140.8 AND BL39.3 |
| CZEK | AIRCRAFT MISSION DESIGN SERIES | SH-2G(A) |
| FEAT | SPECIAL FEATURES | WIDTH IS MEASURED AT MOUNTING BUSHING; LATCH HANDLE HAS 15 DEG. PLUS OR MINUS 2 DEG. FREE TRAVEL WHEN LATCHED; SMALL LATCH PINNED TO HANDLE HOOKS OVER PIN ON SIDE OF MAIN HOOK TO HOLD HANDLE; MAIN HOOK WIDTH IS 0.250-0.260 IN. AND FITS OVER 0.314-0.321 IN. DIA.; TAKE-UP IS 0.440 IN. |
Related NSNs in FSC 1560
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN1560-01-474-4388
NIIN014744388
FSC1560
DEMILQ
PARTS2
MFRS2
Manufacturers
About NSN 1560-01-474-4388
NSN 1560-01-474-4388 is a National Stock Number assigned to Latch Assembly,Aircraft. This NSN part number belongs to Federal Supply Class 1560 (AIRFRAME STRUCTURAL COMPONENTS) under Federal Supply Group 15 (AEROSPACE CRAFT AND STRUCTURAL COMPONENTS). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 1560-01-474-4388, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.